M61A2 Vulcan Cannon

Fact Sheet

.....A lighter version of the Vulcan developed for use on the F-22, the M61A2, is mechanically the same as the M61A1, but with thinner barrels to reduce overall mass to 202 lb (91.6 kg). The rotor and housing have also been modified to remove any piece of metal not absolutely needed for operation and replaces some metal components with lighter weight materials.

.....The Vulcan's rate of fire is typically 6,000 rounds per minute, although some versions (such as that of the AMX International and the F-106 Delta Dart) are limited to a lower rate, and others have a selectable rate of fire of either 4,000 or 6,000 rounds per minute. The M61A2's lighter barrels allow a somewhat higher rate of fire up to 6,600 rounds per minute.

......Until the late 1980s the M61 primarily used the M50 series of ammunition in various types, typically firing a 100 gram (3.5 oz) projectile at a muzzle velocity of about 3,380 ft/s (1,035 m/s). A variety of Armor-Piercing Incendiary (API), High Explosive Incendiary (HEI), and training rounds are available. Around 1988 a new round was introduced, the PGU-28, which is now standard for US Navy and USAF aircraft. The PGU-28 is a "low-drag" round designed to increase muzzle velocity, which rises to 3,450 ft/s (1,050 m/s). It is a SAPHEI (semi armor-piercing high-explosive incendiary) round, providing substantial improvements in range, accuracy, and power over the preceding M-56A3 HEI round. The PGU-28 has not been without problems, however. A 2000 USAF safety report noted 24 premature detonation mishaps (causing serious damage in many cases) in 12 years, compared to only two such mishaps in the entire recorded history of the M56 round. The report estimated that the current PGU-28/B had a potential failure rate 80 times higher than USAF standards permit.